Quantcast
Channel: Millumin Forum
Viewing all 565 articles
Browse latest View live

Particules - version beta

$
0
0
Bonjour, 
Je souhaiterais savoir si je peux remplacer les particules (dans particles spiral) par une image ou par une animation? Quel effet pourrait me permettre de le faire? 
Merci de votre réponse. 

warp function on the output

$
0
0
Hi all,
long time ago.

it would be great if we can warp the output of Millumin, that way we do not have to warp every layer we make.

Thanks,

Vincent

NDI Audio ?

$
0
0
Hi !  Have been testing with NDI output to integrate into other systems and am not able to get Audio routed to NDI.  Is this a system limitation ?  I can route audio to any of my audio boards and interfaces, but not with video via NDI.   Am I doing anything wrong ?

thank you ! 

Manage Column Transition

$
0
0
Hello, is there a way to control manually a transition between 2 columns, with a midi controller or with OSC?
I can't do it with : Interactions > manage column transition
or with : Monitor > Masters, column transition fader
Thanks ! Claire

Bloc Notch

$
0
0
Hello ! Do you plan to integrate notch blocks inside Millumin ?

light fixture

$
0
0
Hi, is it possible to add Starway Stickolor 1210UHD fixture in millumin2?

mapping with 3 VPS

$
0
0
Hello, I am pretty new with millumin and i can't figure how to set the canevas in order to have a 3 VPs projection as you can see in the attached picture. Can you help me ?

Millumin and MidiNotes

$
0
0
Hi,

I try to control Ableton using a Millumin Data layer....a simple play scene in Live that is link to a column millumin...
Using Midipacth bay soft, i m able to send or receive midi between Millumin and Ableton...but Millumin send always the same note!
However, i don't understand how works millumin data layer!
i just need to send a different midi note on each column...but the "current value" don't seem to change the note...so what is "current value"??
in fact, i would simply change the "key" value on each column...but it doesn't work...

So...how could i do this??

thanx



PJLINK and different pages in a project

$
0
0
Hi everybody,

I currently use PJLINK remote control through Millumin. Generally, I've no problem at all.
But when I swith from on page to an another one, I lose connection and I can't send messages to the projector.

Any idea?

Thanks,

Possible Artnet Output Corruption?

$
0
0
Hello all,

I am experiencing something strange where when I enable Artnet, and select my output, the Artnet does not enable. It simply stays red. I have confirmed through the DMX menu that artnet is registering values, and my layers are registering values. all my DMX Layers are set to output over Artnet. But my Artnet device will not enable.

This only happens on one computer. the other one does not do this. As soon as I enable artnet, the light turns green. Is there a possible corruption? I have redownloaded the app, but I don't know if it is actually fully being deleted, because when I reopened it after redownloaded, it had most of my app settings saved still. Where is this information kept?

Thank you!

Free Native Adobe CC HAP exporter for OSX & Windows

$
0
0
For all of you creators, Hap Encoder 1.2.0 is now available

Major update of the HAP encoder including:

  • New native After Effects support on Windows and MacOS
  • Faster export due to avoiding copy-at-end step previously required for XMP information
  • Fix to fades / dissolves in Premiere for alpha-free movies, due to frames not being pre-matted / alpha pre-multiplied
  • Snaps frame-rate to standard rates where sensible, also final frame duration stored automatically, enabling more sensible frame rates to be reported in downstream playback engines
  • Legacy MacOS High Sierra support
  • Fix for creating user presets using 'match source'
  • Numerous behind-the-scenes fixes and improvements

    https://github.com/disguise-one/hap-encoder-adobe-cc/releases/tag/1.2.0-rc2

Surfaces Scale Mode

$
0
0
Hello all,

I love the concept of surfaces, however, if there a way to set surfaces to not stretch or squeeze my image? But rather do a "scale to fill" or "scale to fit" effect?

Thanks!

Outputting through an 8k Pro is stuck in NTSC

$
0
0
Hello all,

I am so new to Millumin, so this may be super super simple. But I am trying to run a 2160p59.94 feed out of Millumin through a decklink 8k Pro. However, the Decklink seems to default to NTSC 525i59.94. And I don't see a place for me to control this. Is there a possible issue here? I have the decklink set to 2160p59.94 default. But it will not appear the way in Millumin. Am I missing something?

Also, when I use "CMD + F" to go fullscreen, my fps is being forced by the Decklink, that is setting to 59.94, down to 30 fps. Not 59.94. Is this changeable?

Further information: The decklink 8k pro is being genlocked at NTSC 525i59.94.

Thank you for the help!

NDI framerate

$
0
0
Hello,

if you setup an output as NDI, the NDI framerate on the receiving machine is always 59,94fps.
No matter what Millumin's global framerate is.

Why is this?

For testing I setup an NDI output with another software (vMix) and in this case the NDI stream is locked to the framerate of vMix (e.g. 30fps).


Best regards
Roland


Softedge with 2 tilted planes

$
0
0
Hello,
I a m trying to adjust a softedge with 2 VPs shooting over 2 tilted planes. When I deform each VP  so it match the planes perspective, the edges that overlap are deformed in a way that they can't blend. 
Could you tell me how i can manage to blend the 2 VPs in a clean softegde ?
Thank You


Layer name tweaks

$
0
0
Have been enjoying my Covid lock downtime to build a CompanionPi setup in a road case.
While trying to get Millumin to give feedback of time remaining of a clip and column number I spotted the Companion plugin asks for the time remaining is default to 'layer 1'. I've noticed that, at least in 3.17.b that the first layer is actually called Layer' and when I make a second it makes 'layer 3'. I think thats a bug in itself but it would be good to lock in a name structure for new versions. 
Ideally it would have the bottom layer to be called 'layer 1' and then as you add layers to the dashboard (and timelines) be called 'layer 2', 'layer 3' etc....
Obviously people can change layer names and change anything to just layer or a label but for defaults could this change be made?
Thanks

Kinect v 2 : What is the best set up to extend the usb 3 signal?

$
0
0
Hello,

I'd like to know if some users has ever experimented to extend the signal of the kinect to the computer. I see different options : active extension cable, optical extender fiber, 2 computeurs?, etc. What about latency?

I have to extend the signal to 20/25 meters.


The cheaper and the more efficient solution is obviously the best.


thanks.

Particles text / FCParticle brush Property

$
0
0
EDIT : I found the solution. I did a bad calibration. But the latency is very high and the animation of the letters is lagging a lot.;;; And my GPU and CPU seem ok. 


Hello Milluminers,

I was experimenting some stuff on Particles text... 
InFCParticle brush Property, I'm trying,  with blob tracker and also with kinect, to make the text move. I used interactions tool to remap mouse position. I see in FCParticle brush Property that the X and Y are changing when i'm moving my blobtracker. But nothing is happening on the text.. 
Or sometimes weird stuff.. Like a line of the text is disappearing instantly.

So isnt it possible to remap the brush tool?

Note : When i'm using the brush tool inside the canvas window everything is working well.

Millumin and wireless footswitch

$
0
0

Hi,

I m looking for a good way (stable way) to control millumin with a footswitch…and if it is wireless it is better!!

I am musician from France…absolutely not a « video technician »…and i try to make visual concert show with this fantastic tool called Millumin…i need to trigger Millumin and Ableton during my performance…however, i have a lot of trouble to control it with a footswitch!

I have use Source Audio SOLEMAN for several years but i had real bad time with it!
I m now thinking of using AirTurn DUO 200…

Does any one could give me an advice???

here s a link of our shows (for the curious)
OU ES TU LUNE? Compagnie Minibox trailers - YouTube
PARALLEL LINES trailers résidence - YouTube


cheers
Ben

Load a column bypassing the transition

$
0
0
Hi

Is there a shortcut to be able to load a column bypassing the transition's timing? So that in rehearsal I can load a column without having to wait the 45 seconds fade in.

Thanks

aroom
Viewing all 565 articles
Browse latest View live